Techniques and Tips

Technique: Roland Simard: Painting With Pulp

Technique: Roland Simard: Painting With Pulp


We are searching data for your request:

Forums and discussions:
Manuals and reference books:
Data from registers:
Wait the end of the search in all databases.
Upon completion, a link will appear to access the found materials.

New Hampshire artist Roland Simard takes papermaking to the next level with his pulp paintings.

by Stephanie Kaplan

Shadow Pool
2007, fiber, 24 x 18. Collection the artist.

New Hampshire artist Roland Simard’s paintings are all about creating layers of texture. “I was attracted to how luminous the fiber pigments were in contrast to what you see in paint,” the artist explains, “and it’s a lot of fun to work with the pulp.”

Simard begins his multistep process with a sketch of his composition. “Depending on the image, I will do a very detailed sketch in pastel if the colors are important, or in graphite if they’re not,” he says. “I do a grid drawing to scale because I can’t draw in the water.” The artist draws inspiration from his natural surroundings in New Hampshire’s White Mountains—as evident in Shadow Pool and Shelburne Birches.

Simard forms the sheet of paper in a large vat of water that sits on a table. A deckle, or frame, is placed in the vat to keep the fibers in place and to maintain the desired size and shape of each sheet. The artist places this drawing on a table next to the vat to provide a guide for the placement of the pulp, and places a mirror above the vat at a 45-degree angle, so he can see the drawing and maintain the correct proportions of the composition.

Shelburne Birches
2004, fiber, 30 x 24. Private collection.

Simard uses 90 percent cotton fibers in his work because they are easy to process; Spanish flax and abaca make up the other 10 percent because they add strength to the sheet and because the fibers are longer. The fiber combination is processed in a machine called a hollander where a paper beater shreds the fiber to a pulp for approximately 30 minutes to keep the fibers somewhat long. Liquid sizing is added to the processed pulp to strengthen and waterproof the finished sheet.

Next, the artist colors the pulp with pure pigments that won’t fade. “Coloring the pulp is like making your own paint,” Simard explains. He finds great joy in using a kitchen blender to mix various combinations of red, yellow, green, blue, black, brown, and white to create the palette for each work.

The artist favors several tools as “brushes” to place pulp in the water—he places the pulp pieces side by side and on top of each other to create the desired image. His favorite tool is a kitchen fork that only has two tines. He also uses wire pieces and paper clips to create small lines, and uses a string as if it were a pencil—“place the string in the wet pulp, lift it up, and then you get a line” Simard explains. This can be seen at work in the line of the fence in Out to Pasture. In this piece he also relied on other tools to create the varied texture in the sky and wheat field. Out to Sea also demonstrates Simard’s ability to manipulate the pulp into a textured, detail composition—the different layers in the sea mimic waves, while the piece of rope hanging over the bottom edge of the work gives the composition a greater sense of three-dimensionality. The artist also loves using various turkey basters to suck up the pulp and distribute it in the vat of water. He also enjoys pouring and splattering the pulp to achieve his desired effect.

Since the pulp remains in the vat of water during the entire process, the individual fibers weave and interlock with each other to form a single sheet. Once the artist is satisfied with the composition, he uses a vacuum system he designed to remove water from the vat. “The trick is to keep the water level equal to the level of the fibers,” Simard explains, “so that the fibers float around and find their own level. You want the fibers to move around a little bit, but if there is too much water in the vat then the pulp sinks and you loose a lot of control.” The vacuum system slowly removes the water from underneath the vat, which prevents the fibers from moving. “You can still work on the texture of the piece once the water is removed—even at this point, you can add a small amount of fiber to make things look more 3-D and to fine-tune the image,” Simard states.

Once the sheet is removed from the water, it is placed on wool felt and left to dry for several days. Once the artwork is dry, the sheet is coated and sealed with a clear, liquid polymer and mounted on museum board. This coating archives the sheet for thousands of years. The final product is a hand-cast sheet of paper that, when seen up close, displays abstract layers of texture and color—yet depicts a unified landscape from afar.

Cotton fibers are processed in the hollander for approximately 30 minutes.Simard uses Aardvark pigments to color white, cotton fibers, which he stores in large buckets. These water-based, concentrated pigments are designed specifically for papermaking and disperse well in the hollander. A retention agent is also added to help the pigment adhere to the fibers.The artist uses a kitchen blender to mix the basic pulp colors into the tints and shades that make up the palette for each work. The pulp can be premixed and stored for later use.Simard adds pigmented pulp to a white pulp base. The fibers are being contained by a Plexiglass deckle that sits within a larger vat of water.
The artist uses a variety of forks and wires to add pulp to the sheet as it is being formed in the vat of water. The forks and wires give Simard more control over his medium, so he can create details using smaller amounts of pulp.Simard uses his favorite tool, a modified fork with two tines, to add pulp to the sheet.Once the sheet is complete, water is removed from the vat using a vacuum system that Simard designed. The water is slowly drawn through the sheet and extracted from underneath the vat. This process keeps the fibers from moving, and preserves the image cast in the sheet.


Watch the video: Pulp Icons: Cast Paper u0026 Prints by Stewart Nachmias (July 2022).


Comments:

  1. Destrie

    In my opinion, they are wrong. I am able to prove it. Write to me in PM.

  2. Yozshuzilkree

    In my opinion, you admit the mistake. I can prove it. Write to me in PM.

  3. Izaak

    Your thought is magnificent

  4. JoJora

    just super - my favorite will be there

  5. Mieko

    Bravo, the brilliant idea

  6. Aeetes

    And can you find out if your blog design is template? I also want one for myself ...

  7. Gardazuru

    Bravo, your thought will come in handy



Write a message